-

Standard 11 Generic Coal Induction (GI) - Surface

Course Overview


Standard 11 (S11) Training Course Brisbane, Townsville or Onsite. 

 

  • Brisbane: Standard 11 (S11) – Full and Refresher

  • Townsville: Standard 11 (S11) – Full and Refresher

WorkSafe Connect has been delivering induction programs for over 10 years and is one of Queensland’s leading suppliers of the Standard 11 (S11) generic induction full and refresher Surface Coal programs.

This 2-day entry level course provides participants with the skills and knowledge required to work on a surface coal mine site in Qld. The course takes participants through the 6 key competencies that will give valuable knowledge regarding common safety practices of coal mines.


The program is made up of the following 6 nationally accredited units of competency (which are recognised by the QLD Department of Mines as the core S11 modules):

  • RIICOM201D Communicate in the workplace
  • RIIGOV201D Comply with site work processes/procedures
  • RIIWHS201D Work safely and follow WHS policies and procedures
  • RIIRIS201D Conduct local risk control
  • RIIERR205D Apply initial response First Aid
  • RIIERR302D Respond to local emergencies and incidents

In addition to safety, our course will run the participants through a brief history of coal mining as well as the future of coal mining. The Standard 11 (S11) Training Course run in Brisbane, Townsville, or Onsite will give you all the basic information required to keep you safe on coal Mines and allow participants to gain access to Coal Mines in Queensland.

In order to complete the course, participants must successfully complete the assessments during the course as well as provide a completed skills and experience form (with supporting verifiable evidence of previous experience in mining or related industries). If a participant is not able to produce this verifiable evidence, the participant will be issued a Statement of Completion at the end of the course and given a Standard 11 Logbook to complete. The participant has 12 months to complete this Logbook and return to WorkSafe Connect (note, there is no additional cost if returned within this time frame). 

Upon successful completion of the course requirements (including evidence of previous experience or completion of a Logbook), the participant will receive a nationally recognised Statement of Attainment in both electronic and hard copy form as well as a credit card sized ‘Competency ID Card’.

WorkSafe Connect offers both the full course which requires 2 days of training as well as a refresher course which takes 1 day of training. Both the Standard 11 full course and Standard 11 refresher course are run often, so your training could take place this week.

If you have any questions regarding which Standard 11 (S11) course is most suitable for you then please get in touch with a member of the WorkSafe Connect team today.


Upcoming Training:

Location
Dates
Townsville,QLD
18 November 2019 to 19 November 2019
Brisbane,QLD
21 November 2019 to 22 November 2019
Brisbane,QLD
25 November 2019 to 26 November 2019
Townsville,QLD
25 November 2019 to 26 November 2019
Brisbane,QLD
27 November 2019 to 28 November 2019
Brisbane,QLD
02 December 2019 to 03 December 2019
Brisbane,QLD
05 December 2019 to 06 December 2019
Townsville,QLD
05 December 2019 to 06 December 2019
Townsville,QLD
09 December 2019 to 10 December 2019
Brisbane,QLD
09 December 2019 to 10 December 2019
Brisbane,QLD
12 December 2019 to 13 December 2019
Townsville,QLD
16 December 2019 to 17 December 2019
Brisbane,QLD
16 December 2019 to 17 December 2019
Brisbane,QLD
19 December 2019 to 20 December 2019
Townsville ,QLD
19 December 2019 to 20 December 2019
Townsville,QLD
06 2020 to 07 2020
Brisbane,QLD
06 2020 to 07 2020
Townsville,QLD
09 2020 to 10 2020
Brisbane,QLD
09 2020 to 10 2020
Brisbane,QLD
13 2020 to 14 2020
Townsville,QLD
13 2020 to 14 2020
Brisbane,QLD
16 2020 to 17 2020
Brisbane,QLD
20 2020 to 21 2020
Townsville,QLD
20 2020 to 21 2020
Townsville,QLD
23 2020 to 24 2020
Brisbane,QLD
23 2020 to 24 2020
Brisbane,QLD
28 2020 to 29 2020
Townsville,QLD
30 2020 to 31 2020
Brisbane,QLD
30 2020 to 31 2020
Townsville,QLD
03 2020 to 04 2020
Brisbane,QLD
03 2020 to 04 2020
Townsville,QLD
06 2020 to 07 2020
Brisbane,QLD
06 2020 to 07 2020
Townsville,QLD
10 2020 to 11 2020
Brisbane,QLD
10 2020 to 11 2020
Brisbane,QLD
13 2020 to 14 2020
Brisbane,QLD
17 2020 to 18 2020
Townsville,QLD
17 2020 to 18 2020
Townsville,QLD
20 2020 to 21 2020
Brisbane,QLD
20 2020 to 21 2020
Townsville,QLD
24 2020 to 25 2020
Brisbane,QLD
24 2020 to 25 2020
Townsville,QLD
27 2020 to 28 2020
Brisbane,QLD
27 2020 to 28 2020
Townsville,QLD
02 2020 to 03 2020
Brisbane,QLD
02 2020 to 03 2020
Townsville,QLD
05 2020 to 06 2020
Brisbane,QLD
05 2020 to 06 2020
Brisbane,QLD
09 2020 to 10 2020
Townsville,QLD
09 2020 to 10 2020
Brisbane,QLD
12 2020 to 13 2020
Townsville,QLD
16 2020 to 17 2020
Brisbane,QLD
16 2020 to 17 2020
Townsville,QLD
19 2020 to 20 2020
Brisbane,QLD
19 2020 to 20 2020
Townsville ,QLD
23 2020 to 24 2015
Brisbane,QLD
23 2020 to 24 2020
Brisbane,QLD
26 2020 to 27 2020
Townville ,QLD
26 2020 to 27 2020
Townsville,QLD
30 2020 to 31 2020
Brisbane,QLD
30 2020 to 31 2020
Townsville,QLD
02 2020 to 03 2020
Brisbane,QLD
02 2020 to 03 2020

Performance Criteria

  • Work safely and follow WHS policies and procedures
  • Apply initial response first aid
  • Comply with site work processes/procedures
  • Conduct local risk control
  • Communicate in the workplace
  • Respond to local emergencies and incidents

Course Outline

  • General mining overview
  • Legislation
  • General safety
  • Managing workplace hazards
  • Risk management
  • Isolation and tagging procedures
  • Traffic and mobile equipment procedures
  • Emergency procedures
  • Life saving first aid
  • Fire fighting and fire prevention
  • The environment
  • The work process

Faqs Standard 11 Generic Coal Induction (GI) - Surface

Why do I need to do the GI /Standard 11 Induction?

You will need to do the GI/Standard 11 if you want to work in the Queensland Coal Mining Industry.

The Coal Mine Safety and Health Regulations 2001 requires that each ‘coal mine worker hold the Standard 11 qualification and that this qualification is updated by refresher training under the mine training scheme at least once in every five years’.

 

Why should I do this course with WorkSafe Connect?

WorkSafe Connect is one of Queensland’s leading providers of the Standard 11 Generic Induction Coal Surface Program.

Our custom program focusses on safety leadership, problem solving and decision-making skills in situations of hazard identification and risk management and is facilitated by experienced, award winning and engaging trainers.

Regardless of your background and experience we will work with you to identify the best pathway to completing this course and offer this program weekly in Brisbane and Townsville as well as onsite.

 

I do not know which site I will be on, how can I be sure your induction is suitable for my work site?

If you are heading to a specific mine site then we do recommend to all participants to contact the mine site in advance regarding what entry requirements they require.

While the Generic Induction has been a recognised industry standard for almost 20 years and aligns with Queensland-specific regulatory requirements for anyone working in, or wishing to work in, the Queensland coal mining industry, we do note that there are a limited number of mine sites (including those run by BMA) that do have a standalone Generic Induction Courses.

If you have any questions regarding what course is the right one for you then please call us and we will be happy to work with you to make sure the course is suitable for your requirements.

 

What is a Unique Student Identifier (USI)?


If you're studying nationally recognised training in Australia from 1 January 2015, you are required to have a Unique Student Identifier (USI).

Your USI links to an online account that contains all your training records and results that you have completed from 1 January 2015 onwards and without this number we cannot issue you your statement of attainment.

If you do not already have a USI please click on the following link to create one.

https://www.usi.gov.au/students/create-your-usi

It is a straight forward process to complete this online and you will require a Driver's Licence, Medicare Card, Australian Passport or Birth Certificate to proceed.

 

Locations

Brisbane

Building, Room 1.02 - Evans Deakin Room
Construction Training Centre
460-492 Beaudesert Road
Salisbury, Brisbane
QLD 4107

Townsville

327 Bayswater Road
Garbutt
Townsville
QLD 4814

On-site

WorkSafe Connect delivers remote and onsite training, assessment and verification of competencies for high risk and industrial courses.


Course ID: 7943744 - Standard 11 Generic Coal Induction (GI) - Surface Brisbane

Standard 11 Generic Coal Induction (GI) - Surface

Highlights
  • Award winning training
  • Practical focus
  • Flexible delivery
Duration
2 days
Competency
RIIWHS201D - Work safely and follow WHS policies and procedures
RIIERR205D - Apply initial response first aid
RIIGOV201D - Comply with site work processes/procedures
RIIRIS201D - Conduct local risk control
RIICOM201D - Communicate in the workplace
RIIERR302D - Respond to local emergencies and incidents

Standard 11 - Refresher
Brisbane | Townsville | Onsite
Offered Weekly

1null